PRODUCTION PLANT


Manufacturing Schedule;

Our typical manufacturing schedule starts with the recieving order from our customers. According to the order ,it requires to prepare the raw materials such as pig iron,scrap steel etc. And also requires manufactured materials such as cores.
So pattern and core boxes which has been sent from our customers are prepped for the production.
Core room starts working first, and gets cores ready for molds which are being made.Meanwhile mold halves ( upper and lower ) are made and placed to the assembly area.At the assembly area, molds are flow coated and cores are set in place. The mold is then closed up for pouring.
After molds are staged on line,melted raw materials with our electircal induction furnace brougth to the molds and pouring process starts. Once poured, the molds are allowed to cool before next being sent to the shakeout. At the shakeout, the castings are separated from the sand mold. The sand is sent to a reclamation system so that it can be reused in the molding process.After shakeout is done,castings are sent to the cleaning room where they are prepared for costumers specifications. Processing in the cleaning room includes shot blasting, cut-off, welding, heat treating and inspection.
1-Receving order
2-Schedule
a)Core Making
a-1)Molding
a-1-a)Flow Coat
a-1-b)Assembly
b)Melting
b-1)Spectro
3)Pouring and Shakeout
4)Cleaning room
a)Shot-blast
b)Cut-off
c)Welding
d)Grinding
e)İnspection
f)Heat treatment

    

  • Ömeroğlu Metallurgy

  • Ömeroğlu Metallurgy

  • Ömeroğlu Metallurgy

  • Ömeroğlu Metallurgy

  • Ömeroğlu Metallurgy

  • Ömeroğlu Metallurgy

  • Ömeroğlu Metallurgy

  • Ömeroğlu Metallurgy

  • Ömeroğlu Metallurgy

  • Ömeroğlu Metallurgy

  • Ömeroğlu Metallurgy

  • Ömeroğlu Metallurgy

  • Ömeroğlu Metallurgy

  • Ömeroğlu Metallurgy